| Version Fixed |
|
Date |
|
Problem Fixed |
| |
|
|
|
|
| 2.0.3013.27530 |
|
04-07-08 |
|
MD5 Checksum
42899BC61857E75C2C7640E358B07B19
Problems Fixed
• ESX 3.5 now populates the VM side tab under the Disk tab.
• Powered on VMs now appear in the VM side tab under the Disk tab.
• ESX 3.0.1 servers stay connected to the Virtual Centers
• Multi CPU stats now appear.
• Packet traffic populates for host NICs.
• Charge back groups are now saved.
• ESX 3.5.0 data is graphed.
• My Virtual Infrastructure is selected with each start up of the GUI.
• VMotioning a VM from one server to another removes the VM from the source list and adds it to the destination list. |
| 2.0.2924.18358 |
|
01-11-08 |
|
Added 3.5 support.
Rebranded to vCharter.
Top 5 now show in the correct order if you add and remove items.
New Virtual Machines are shown without a GUI reboot.
New virtual machines are shown within a report without a service restart.
At a Glance will now check for more hosts every 70 seconds.
Added support to show more than 6 hosts.
Billback memory count reports total memory not used memory. |
| 2.0.2768.16068 |
|
07-31-07 |
|
Fixed the loosing of docking of CPU Panel when minimizing, maximizing from the system tray.
Added export feature where the export can be picked at every hour.
Enabled compression and email of data exports.
ESX Hosts load at different intervals based on initial server load and incremental loads.
Enabled configuration of SSH port via Configuration settings.
Adjustment level in Share Adjustments fixed for 2.5.x servers.
Corrected reports "Only Show Between" time.
The memory % numbers were not reported correctly for VI3 hosts. Resolved. |
| 2.0.2645.27018 |
|
04-02-07 |
|
Blank reports on some installations when running any type of report
The new registered VMs list did not show while charter was running and the registration happened afterwards
The report options now suppports a custom time range in a Group box
Data collection problem when the format was decimal
Reports did not show correct physical CPU count
Fixed the billback data collection for ServerVMType
Fixed NIC listing based on broadcom NICs
Billback freezes when removing group memberships |
| 2.0.2608.17543 |
|
02-23-07 |
|
When removing a container, the servers were not getting disposed off correctly. Resolved
The running of support from toolbar icon was not working when you had any container node selected. Resolved
Adjusting Memory shares from toolbar icons was not working. Resolved
Resolved the VMFS size reporting based on the block size. It was getting reported based on 1K blocks.
Removed extra socket connections when connecting to a 2.5.2 and lower host which had bad authentication.
Changed the way we were collecting VM Memory information for 2.5.x servers to only 1 call.
Changed the UUID to point to uuid.location from uuid.bios in 2.5.x servers.
Changed the Per VM Nic listing method in 2.5.x servers to use API.
In the Console Form under Summary the string was trimming first 3 characters on each line. Resolved.
Setting the height of the splitter at the VM CPU tab.
Docking of CPU Status on the left was lost in between collection intervals. Resolved.
Server Info on the left panel was not refreshing every 20 sec because of non-binding of event. Resolved.
Listing of Per VM under disks modified to not show the powered off VMs. |
| 2.0.2589.22812 |
|
02-02-07 |
|
Scheduling of Bill Back Report enabled in command line.
SSHPort other than 22 enabled for Hosts this can be changed under settings.
VM Performance Report was showing CPU Count 0 for all VMs
SQL data recording for SQL2000 SP4 was not recording, resolved
SQL for NT Authentication was broken resolved
Duel Core licensing calculations for ESX Server 2 not working correctly, resolved
Interval Labels Added to configuration settings.
Inability to add a Bill Back group wile using MS Access, resolved
Reports VM Performance Reports and host capacity reports showing no data, resolved |
| 2.0.2575.31378 |
|
01-19-07 |
|
Fixed Per-VM Selection (Checkbox click) at ServerView - > VMs level
Tool tip enabled for CPU charts at ServerView Level
Reduced the number of calls of the VMware API
Reports fixed for Custom Time Period
Displaying message that Performance numbers are not available when API does not return metrics
The Top25 VM shows the top Used now
The Enterprise/Container View for Top25 VM will scroll when the Control is resized
Cleaning of the SSH when removing servers |
| 2.0.2572.28493 (RC1) |
|
01-16-07 |
|
Loading Servers message when there are no servers fixed
Expand/Collapse All Nodes Feature as a Right Click menu item
Disposing extra SSH adapters when removing Hosts
Calling VI Client. Logout when Charter is done with collecting
VM/CPU chart on enterprise and container views now show the Top 25 VM’s by CPU Used % in sorted order. If individual VM/CPU’s are selected in the list view, only those selected are shown in sorted order.
Added new feature to show all the VMs at the Enterprise and Container Level
SSH connections cleaned up and faster speed
Disposing of controls when the ESX Server is removed
ESX host Disconnecting of Servers fixed |
| 2.0.2561.27866 (Beta) |
|
01-08-07 |
|
Feature Added - Non root User for ESX Server 2.5.x
Powered On/Off VM shows/removes in the lists
Same Name VM on a single Host was causing issues
Changed collection of Per VM NIC information on 3.x servers
Memory leaks in Container View fixed
Charter Reports were not showing the "Only Show Between" time period, when the SQL database was selected
Charter reports were failing when the database setting was changed (from Access to SQL or from SQL to Access) |
| 2.0.2554.18753 (Beta) |
|
|
|
Miscellaneous GUI enhancements
Feature added of Per VM NIC data
Added data collection of VM NIC information
Storing VM Nic numbers to the DB and Export ServerVmNic Table
View Processes Bugs fixed
Invalid FQDN is handled during adding an ESX host
Lose of connection to server(s) now properly being handled
Panels now correctly updated against server status as a change in status happens
Checking for disconnected server(s) periodically, and attempting to re-connect now occurs |
| 2.0.2547.13448 (Beta) |
|
|
|
Cosmetic GUI enhancements
Collection speed improved for VI3 and ESX 2
SQL Directory bug fix. If the directory doesn’t exist vCharter will create it for the SQL DB
Refresh Interval moved to app.config
Globalization bug fixes for Regional settings
Licensing checksums fixed
Status messages now update the collecting process on bottom left of the product |
| 1.5.2379.20249 |
|
|
|
*Web Released* Fixed charter not asking for service start after removal and reinstall/made data service collection interval configurable |
| 1.5.2378.24667 |
|
|
|
Fixed problem with charter history buffer |
| 1.5.2363.23754 |
|
06-21-06 |
|
Web Release |
| 1.5.2362.23853 |
|
|
|
Fixed problem with LUNs not showing up when LUN numbers > 9 |
| 1.5.2356.28775 |
|
|
|
Alert box no longer modal/missing tooltips/disk share selector has a button to hide unused shares |
| 1.5.2355.21472 |
|
|
|
Enumerating VMs message fixed/My Virtual Infrastructure selected on startup/Server info window scrollbar fixed/Server console window scrollbar fixed/memory and disk shares resetable |
| 1.5.2351.25419 |
|
|
|
Fixed problem with NIC name shown instead of NIC performance on some servers |
| 1.5.2349.28395 |
|
|
|
vCharter shows all servers on startup/esxcharter service startup dialog added |
| 1.5.2336.17822 |
|
|
|
Console graph missing in esx2.5.3 fixed/Alpha SQL support added |
| 1.5.2281.25234 |
|
|
|
vCharter changed to a service |
| 1.1.2267.28554 |
|
|
|
VMs not updated |
| 1.1 |
|
|
|
Alerting service added |
|
|
|
|
|
